How to install wallpaper on the walls is a skill that seems more difficult than it really is. You can master the steps with the right tools, and some practice. As with any craft, beginners may make mistakes, but if you choose the right paper type and pattern, you can correct or avoid mistakes.
You should avoid expensive handprint paper, which can stain with one touch of water, tear easily, and permanently show creases. Instead, simplify your work by choosing one of the many cheap vinyl coated papers. They are washable, if you put excess glue, you can wipe them with a wet sponge. They can also be elongated, to help straighten seams or let you peel and reattach ill-fitting strips.
Materials To Install Wallpaper
The important things that you need to install wallpaper are:
To make sure you buy enough wallpaper, measure the width and height of all the walls, then use a wallpaper calculator (which you can find on line or download as an app.) Simply Google ‘Wallpaper Calculator’ to find a number of options from credible sites.
Wallpaper application brush
Choose one with a handle in the middle so that it is easier to fit into the finished pasta tub.
Plumb line measuring tool
Wallpaper cutting knife and scissors.
Using a knife is easier, but scissors are better for strips of wallpaper that won’t cut because they get wet with the glue. You will also need scissors to cut the paper from the rolls.
For those of you who want to install your own wallpaper, let’s see how to install the following wall wallpapers!
Tidying the Walls
First, make sure the walls are flat. You have to fix the bumps and holes in the walls. Remove any nails, hooks or screws with pliers. Fill the large hole with filler and sand the holes before applying the wallpaper so that they do not cause protrusions under the strip.
Then, make sure all walls are clean and dry and free of dirt and cobwebs. If there are ‘problem areas’ such as damp, make sure this problem is resolved before installing the wallpaper.
Measuring Wallpaper Wall
Choose an ‘easy’ wall area (one that doesn’t have a switch) to start with. If possible, start in an area that might not be very visible once you’re done (if there’s covered furniture in front of it, for example). This way, if the first strip or two of wallpaper has some errors, it won’t be a problem.
Measure the length of the wall that needs to be papered, then add about 20 cm as a precaution (at the top and bottom to account for sloping walls or incorrect measurements). Unroll the paper on the sticky table, then using a measuring tape and a pencil, make a mark on the back of the paper where the paper needs to be cut. Fold the paper and make sure it is aligned around the edges, then cut the first strip.
Installing the Wallpaper Section On the wall
Now that you have the first piece cut, it’s time to attach it to the wall. Give the wall a generous layer of glue (put the roll on the wall first and mark how far away the wall needs to be pasted), then glue a small sheet of paper in the top corner for easy installation first.
Apply the strip to the top of the wall, then gently spread it against the wall with a soft wash using a clean cloth. Smooth it from the center of the paper to the edges. Remember to smooth it gently so the paper doesn’t crease. Once it is in place properly, use a cloth to smooth the edges.
Then, use the cloth to push the paper as far as it will go into the gap where it meets the ceiling and the edges, so that a thin line will form to mark where you will cut the excess wallpaper paper.
Installing Wallpaper in a Corner of the Wall
The trick with corners is to focus first on the wall first, then focus on moving the second piece of paper to the next wall. Meet the edges and patterns as before, then wipe your fabric gently into the corners. Do not put too much pressure on the top and bottom corners to prevent the paper from wrinkling.
Once the paper fills the corner, carefully place the paper on the second wall. Using scissors, cut the paper at the top of the corner that meets the ceiling. This will help you fold the paper onto the second wall.
Make another cut at the bottom of the strip where the paper meets at the corner at the edge, then focus on smoothing the paper across the wall from corner out to edge. Make sure the paper does not come off the previous strip. If so, carefully lift it up, replace it, then flatten it back against the wall.
Installing Wallpaper in Difficult Wall Areas
Pasting wallpaper on the part of the wall where there are switches and light sockets is not that easy. Hang the wallpaper as before, but don’t smudge the strip too much. Feel where the socket or switch is under the paper, then punch a small hole with scissors. Carefully cut the paper, moving it from the center of the socket towards the edge, until you can press it against the wall and the socket or switch opens completely.
Using a cloth, smooth the paper gently around the edge of the socket / switch, then make a final cut with scissors. Flatten the rest of the strip down towards the switch / socket.
Those are the ways to put wallpaper on the wall. You can find various kinds of quality wallpapers at Ruparupa. Come on, buy immediately before it runs out!